Knife Edge Gate Valve Manufacturers In Junagadh

Knife gate valves should only be used for applications requiring a totally open or entirely closed position and should not be used to normalize flow unless they are designed for it. Whenever fluid is forced next to a partially closed gate, there will be a tremor, gradually eroding the disc and seat. In addition, the knife gate valves are designed to gradually open and close to look after against the impacts of irrigate mallet.

Knife gate valves are designed mainly for on-off and isolation services in systems with high content of suspended solids. Knife gate valves are designed to work in some of the most harsh environments, typically having a sharpened blade to cut through heavy liquids.

Valve for chain vs. Gate valves

Gate valves are designed for totally open or fully closed service. They are installed in pipelines as isolating valves, and should not be used as control or regulating valves. A gate valve is a multitier valve meaning that the operation of the valve is done by means of a threaded stem.

Also, we offer:

Knife Edge Valve for Chain Operated

Knife Edge Gate Valve with SS Cladding

Knife Edge Gate Valve with Gear Operated

Knife Edge Gate Valve with Pneumatic Operated

Knife Edge Gate Valve Manual Operated

Ic Knife Edge Knife Edge Gate

Lug Type Valve Designed According To MSS-SP-81 For Industrial Service Applications. The Design of the Body and Seat Assure res Non-clogging Shut off on Suspended Solids in Industries Such As:

Pulp and Paper
Food and Beverage
Wastewater Treatment Plants
Bulk Handling
Chemical Plants
Mining

Knife Gate Valves Chain Operated Is and Semi directional haul Type Valve Designed according To CF8M - WCB – 304 CF8m for Industrial Service Applications. the Stem Nut: Gun Metal Design Of The Body And Seat Assures Non-clogging Shut Off On Suspended Solids In Industries Such As: Fasteners: Zinc Plated Carbon Steel, Sizes Pulp And Paper Food And Beverage Wastewater Treatment Plants Bulk Handling Plants and
Mining

DN 50 to DN 1050 (larger diameters on request) Working Pressure

DN 50 to DN 400: 10 kg/cm2 / 150 psi
DN 450 TO 700: 4 kg/cm2 / 60 psi
DN 700 TO 1050 3 kg/cm2 / 45 psi

Stainless Steel Knife Gate Valve Is An (Uni) Semi-directional For Industrial Service Applications This Body And Seat Assures Non-clogging Shut Off On Suspended Solids In Industries Such As:

Technical Specification :

Part : Stainless Steel and Cast Iron
Body : C.I ,WCB CF8, CF8M
Gate : Aisi 304/306 Aisi 316-18
Seat : Metal To Metal(EPDM/Viton/PTE/Nitrila)
Packing : PTFE Impel, Synch, and Fiber
Gland Follower : Ductile Iron CF,8,CF8m,WCB
Stem : Aisi 304
Stem Nut : Gun Metal
Yoke : Carbon Steel
Seat Ring : Aisi 304 Aisi 316
Operated : Chain Wheel
Fasteners : Zinc Plated Carbon Steel

Sizes : DN 50 to DN 1050 (diameters request)

Working demands

DN 50 to DN 400: 10 kg/cm2 / 150 psi
DN 700 TO 1050 3 kg/cm2 / 45 psi

Standard Flange Connection

Hand Wheel Operation, Pneumatic Operation, and Hydraulic Operation, Wheel Operation Electric Motor Operation, Bevel Gear Operation

E-table DIN PN 10 And Aisi B16.5 (class 150, and 190)

Note: Flange Connections are Offered Request.

#Knife Edge Gate Valve manufacturers in Junagadh